NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
Grand Canyon University NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test-Step-By-Step Guide
This guide will demonstrate how to complete the Grand Canyon University NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test assignment based on general principles of academic writing. Here, we will show you the A, B, Cs of completing an academic paper, irrespective of the instructions. After guiding you through what to do, the guide will leave one or two sample essays at the end to highlight the various sections discussed below.
How to Research and Prepare for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
Whether one passes or fails an academic assignment such as the Grand Canyon University NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test depends on the preparation done beforehand. The first thing to do once you receive an assignment is to quickly skim through the requirements. Once that is done, start going through the instructions one by one to clearly understand what the instructor wants. The most important thing here is to understand the required format—whether it is APA, MLA, Chicago, etc.
After understanding the requirements of the paper, the next phase is to gather relevant materials. The first place to start the research process is the weekly resources. Go through the resources provided in the instructions to determine which ones fit the assignment. After reviewing the provided resources, use the university library to search for additional resources. After gathering sufficient and necessary resources, you are now ready to start drafting your paper.
How to Write the Introduction for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The introduction for the Grand Canyon University NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test is where you tell the instructor what your paper will encompass. In three to four statements, highlight the important points that will form the basis of your paper. Here, you can include statistics to show the importance of the topic you will be discussing. At the end of the introduction, write a clear purpose statement outlining what exactly will be contained in the paper. This statement will start with “The purpose of this paper…” and then proceed to outline the various sections of the instructions.
How to Write the Body for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
After the introduction, move into the main part of the NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test assignment, which is the body. Given that the paper you will be writing is not experimental, the way you organize the headings and subheadings of your paper is critically important. In some cases, you might have to use more subheadings to properly organize the assignment. The organization will depend on the rubric provided. Carefully examine the rubric, as it will contain all the detailed requirements of the assignment. Sometimes, the rubric will have information that the normal instructions lack.
Another important factor to consider at this point is how to do citations. In-text citations are fundamental as they support the arguments and points you make in the paper. At this point, the resources gathered at the beginning will come in handy. Integrating the ideas of the authors with your own will ensure that you produce a comprehensive paper. Also, follow the given citation format. In most cases, APA 7 is the preferred format for nursing assignments.
How to Write the Conclusion for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
After completing the main sections, write the conclusion of your paper. The conclusion is a summary of the main points you made in your paper. However, you need to rewrite the points and not simply copy and paste them. By restating the points from each subheading, you will provide a nuanced overview of the assignment to the reader.
How to Format the References List for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The very last part of your paper involves listing the sources used in your paper. These sources should be listed in alphabetical order and double-spaced. Additionally, use a hanging indent for each source that appears in this list. Lastly, only the sources cited within the body of the paper should appear here.
Stuck? Let Us Help You
Completing assignments can sometimes be overwhelming, especially with the multitude of academic and personal responsibilities you may have. If you find yourself stuck or unsure at any point in the process, don’t hesitate to reach out for professional assistance. Our assignment writing services are designed to help you achieve your academic goals with ease.
Our team of experienced writers is well-versed in academic writing and familiar with the specific requirements of the NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test assignment. We can provide you with personalized support, ensuring your assignment is well-researched, properly formatted, and thoroughly edited. Get a feel of the quality we guarantee – ORDER NOW.
Sample Answer for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
According to Parab & Bhalerao, “statistical tests are mathematical tools for analyzing quantitative data generated in a research study” (2010). There are a number or test that researchers can use which can also become overwhelming and cause confusion for the research, and that can lead to sabotaging and tainting their study.
Selecting the statistical test helps the researcher understand what to look for in the study as well as help organize their data. Parab & Bhalerao (2010) stated that “Before selecting a statistical test, a researcher has to simply answer the following six questions, which will lead to correct choice of test:”. NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
- How many independent variables covary (vary in the same time period) with the dependent variable?
- At what level of measurement is the independent variable?
- What is the level of measurement of the dependent variable?
- Are the observations independent or dependent?
- Do the comparisons involve populations to populations, a sample to a population, or are two or more NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
samples compared?
- Is the hypothesis being tested comparative or relationship?
Statistical analysis can help you understand the conclusions of a study. The t-test is what I would use. T-tests are inferential statistics used to determine whether there is a significant difference in the means of two groups that may be related by certain features” (Investopedia, n.d.). By displaying the typical nurse-to-patient ratios, this test would assist me in determining if low or high staffing has a positive or negative effect on patient health outcomes.
Statistical tests can be chosen using independent variables and other project designs. I’m seeking for evidence that training caregivers about correct PPE use increases compliance as part of my research. At a minimum, the effects of staff PPE usage models have been identified as a confounding variable. According to Siebert et al., staff modeling and education had a significant influence on visitor compliance (2018). However, there is a test that takes into consideration participant differences.
Because each group contains a diverse set of people, I’ve decided to employ an ANOVA with a mixed design. A mixed design includes “change through time, differences between groups, and the interaction of time and group effects” (Tappen, 2016). This will show the differences between and within groups (e.g., educated vs. uneducated). This tool can be used to compare before and after educational interventions. It will be easy to keep track of how many people are in each category. It could be used to measure the change over time from several points in time if necessary.
Seibert, G., Ewers, T., Barker, A. K., Slavick, A., Wright, M. O., Stevens, L., & Safdar, N. (2018). What do visitors know and how do they feel about contact precautions? American Journal of Infection. 46(1): 115–117.
Tappen, R. (2016). Advanced Nursing Research. Jones & Bartlett.
Sample Answer 2 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
When conducting research, it is critical to select the appropriate statistical test because research must maintain validity. Two key points should be considered when performing quantitative data statistical analysis: One is to identify the type of experimental design correctly, and the other is to check whether data meets the preconditions of the parameter test (Liang & Wang, 2019. If these are not taken into account, data can be misused and false conclusions drawn.
I thought the Paired T- Test would be the best fit for my project proposal. The Paired T-Test examines the relationship between two variables in the same population. For instance, pre and post test scores. This would allow for a comparison of performance before and after the organizational change implementation was completed. NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The first variable would be the amount of hands off time during cardiopulmonary resuscitation, while the second variable would be the amount of hands off time during CPR with the implementation of continuous compressions during defibrillation. When these two variables are compared, the conclusion should be that continuous compressions during hands-on defibrillation reduce hands-off time during CPR and improve patient outcomes. Ultimately this test would determine the amount of “hands-off” during CPR comparing standard CPR and continuous compressions during defibrillation.
Liang, G., Fu, W., & Wang, K. (2019). Analysis of t-test misuses and SPSS operations in medical research papers. Burns & trauma, 7.
Sample Answer 3 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
Quantitative data come from measurements that yield data in numeric form ranging from binary to continuous numeric expressions(Polit, 2017).The statistical test that I would use is a paired T-test. This is a type of Parametric test which is applied when data is normally distributed not skewed (Najmi et al., 2021). The data should be normally distributed and quantitative. This is appropriate for my project which is a quantitative design. The paired T-test is used when one group serves as its own control group.
It is used to compare the two means and is used in small samples(Najmi et al., 2021). My project is to reduce CAUTI rates by using patient/family engagement and empowerment. I would use a T-test to compare pre and post intervention CAUTI rates to determine if the intervention was successful in reducing incidence.
Statistical data analysis can be beneficial in a variety of ways, not only in the corporate world, but also in the healthcare sector, particularly in research. To be able to analyze or accurately interpret the data that comes from the results, one must first understand what statistical procedures are and what the concepts underlying them are (Wienclaw, 2021).
Regression analysis is the statistical test that I would use to evaluate the outcomes in the evidence-based practice (EBP) project proposal. This is regarded as a trustworthy approach of determining which variables influence the result of the issue of interest. There are various types of regression analysis that can be utilized, with linear regression being one of them.
The specific statistical test that I would apply for my research would be linear regression analysis. This test was chosen because I wanted to see what effect my independent variables (education and lack of education) have on the outcome of my dependent variable (cervical cancer screening rates).
The statistical test of linear regression analysis is used to “estimate the correlation of greater than or equal to one independent (predictor) variable with a continuous dependent variable” (Schober & Vetter, 2021, p. 108). An estimate of the effect of my independent variables (education and no education) on my dependent variable is the type of information that this test will reveal concerning my project’s outcomes (cervical cancer screening rates).
This will aid in determining the influence of education vs. no education on the rising cervical cancer screening rates among ethnic minority women in my demographic. The use of linear regression analysis can also give me with information on how my two independent variables interact and whether one’s effect is dependent on the value of the other (Schober & Vetter, 2021).
Reference:
Schober, P., & Vetter, T. R. (2021). Linear regression in medical research. Anesthesia & Analgesia, 132(1), 108-109. https://doi.org/10.1213/ANE.0000000000005206
Wienclaw, R. A. (2021). Statistics and data analysis. Salem Press Encyclopedia. NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this testhttps://lopes.idm.oclc.org/login?url=https://search.ebscohost.com/login.aspx?direct=true&db=ers&AN=89163982&site=eds-live&scope=site&custid=s8333196&groupid=main&profile=eds1
Sample Answer 4 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
Predictive analytics is a type of data science that goes beyond ordinary predicting or estimating (What is predictive analytics?). The PAW Resource Guide (PAW Resource Guide, 2021). Big data is all about prediction, and the whole goal of data is to learn from it in order to make predictions. Organizational and operational decisions are driven and rendered by predictions. A predictive model creates a prediction score for each individual, which directly drives or informs decisions for that individual, such as whether to apply a specific medical treatment, rather than just presenting insights.
Budgets can be allocated based on per-person estimates, supporting health leaders with the resource allocation dilemma (Giga, 2017). Early detection is aided by a predictive model, which allows preventative measures to begin sooner while potentially reducing the need for invasive investigative procedures later in the care continuum. NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The mission of Predictive Analytics World (PAW) is to foster breakthroughs in the value-driven operationalization of established deep learning methods (What is predictive analytics? The PAW resource guide, 2021). Their mission aligns for this evidence-based practice (EBP) project, and to process the pilot implementation data before deciding whether the change is appropriate for adoption into practice and if the process should be hard-wired and integrated system-wide.
Ultimately, producing better patient outcomes by helping to target and treat high-risk patients is the goal (Giga, 2017). Predictive analytics technology learns from the data to predict or infer an unknown, resulting in improved outcomes, lower costs, and higher patient satisfaction. The data will determine if the unknown, whether conducting routine sleep screening increases the discovery and treatment of obstructive sleep apnea (OSA).
From this starting point, the data collection will build on evaluating the potential rewards against expenditures while providing high-value patient outcomes (Giga, 2017).
References
Giga, A. (2017). How health leaders can benefit from predictive analytics. Healthcare Management Forum, 30(6), 274–277. https://doi.org/10.1177/0840470417716470
What is predictive analytics? The paw resource guide. Predictive Analytics World. (2021, March 2). https://www.predictiveanalyticsworld.com/predictive-analytics/.
Sample Answer 5 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The type of Study I chose for my project is a quantitative study, this study requires gathering data from a reliable verifiable source. Once the data is collected a statistical analysis of the data would be required to help present the data. When interpreting the data, a statistical test can also help decrease bias by helping the clinicians consider how multiple explanations for a report study can be presented(Melnyk & Fineout-Overholt, 2019).
My evidenced based project goal is to view how will education of nurses about QBL improve their awareness and start earlier treatment of Postpartum hemorrhage. The Statistical test I choose is the t-test this test is used to analyze the population and compare to means to different populations. NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The T-test will help to analyze the data pulled from the chart review and compare the post-implementation data to the pre-implementation data(Fitzpatrick, 2017). The T-test is a simple test that compares the differences between two groups and find a significant statistical occurrence. NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
The data will be utilized to show how the education of the process increased the usage of QBL and increased awareness of how to use the tool will improve patient care. The T-test will compare the pre and post data with hopes it will reveal how the implementation of this test improved awareness. My other hopes will show how this implementation of the project gives the nurses the why behind the project and increase buy in.
Fitzpatrick, J. J. (Ed.). (2017). Encyclopedia of nursing research (4th ed.) [ebook]. Springer Publishing Company. https://doi.org/10.1891/9780826133052
Melnyk, B. M., PhD, RN. APRN-CNP, FAANP, FNAP, FAAN, & Fineout-Overholt, E., PhD, RN, FNAP, FAAN. (2019). Evidence-Based Practice in Nursing& Healthcare A Guide to Best Practice (4th ed.). Wolters Kluwer.
Sample Answer 6 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
This is an informative post. Indeed, the best statistical test for your project is a t-test. Usually, the t-test is used to compare the means of two groups. In this case, the test will be crucial in comparing the rate of hospital-acquired pressure injuries in the pre-implementation phase and the post-implementation phase. A t-test is critical in testing the hypothesis to establish whether the process or treatment has an impact on the target population, or whether the groups vary from one another (Achen, 2021).
The t-test characterizes a parametric test of variation, which implies that it makes similar assumptions concerning the data just like other parametric tests. The assumptions are that data are independent, have the same amount of variance in every group being compared, and are normally distributed. As such, if your data fall out of these assumptions, it is recommended to consider nonparametric options for the t-test (Kim & Park, 2019). In deciding the type of t-test to use, it is important to consider whether the groups being compared come from one or various populations and whether you intend to test the variation in a particular direction.
References
Achen, C. H. (2021). The statistical analysis of quasi-experiments. University of California Press.
Kim, T. K., & Park, J. H. (2019). More about the basic assumptions of t-test: normality and sample size. Korean Journal of Anesthesiology, 72(4), 331-335. https://doi.org/10.4097/kja.d.18.00292
Sample Answer 7 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
This is an insightful and compelling post. Indeed, the selection of a suitable statistical method is extremely critical in data analysis. However, I agree with you that the process of choosing the appropriate statistical method is a challenging one, especially for students. An incorrect selection of the statistical method not only leads to grave problems when interpreting the findings but also compromises the study’s conclusion. Statistical methods are available for every situation and the identification of the appropriate statistical method requires the knowledge of the assumptions and conditions of the methods.
The selection of the appropriate statistical method should be guided by factors such as the objective of the study, the nature of observation, and the type and distribution of data used (Mishra et al., 2019). Although the choice of t-test in your project is appropriate, it is important to consider the limitations of the t-test such as avoiding the independence assumption, possibility of order effects, and possibility of sample size reduction (Pandis, 2021).
References
Mishra, P., Pandey, C. M., Singh, U., Keshri, A., & Sabaretnam, M. (2019). Selection of appropriate statistical methods for data analysis. Annals of cardiac anaesthesia, 22(3), 297. Doi: 10.4103/aca.ACA_248_18
Pandis, N. (2021). Why using a paired t-test to assess agreement is problematic? American Journal of Orthodontics and dentofacial orthopedics, 160(5), 767-768. https://www.ajodo.org/article/S0889-5406(21)00444-3/fulltext
Sample Answer 8 for NUR 590 Topic 4 DQ 2 Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test
Data analysis is a process that usually follows data collection in an evidence-based project. The analyzed data can be used to determine the efficacy of the project and to evaluate how effective the project has been. The analyzed data can also demonstrate how effective the processes used in the project were (Grove & Grey, 2018). Therefore, it is important to choose the most appropriate statistical tests which can be used to reveal important aspects of the project and help the project implementers make an informed decision regarding the project as well as the next course of action to be taken based on the observations.
One of the statistical tests that will be used in the proposed evidence-based practice project is the sample t-test. A sample t-test can be used to compare the knowledge gained by the nurses regarding the training offered to them on the use of CAUTI bundle to control the rates of CAUTI (Grove & Cipher, 2019). It will be important to determine the change in knowledge as a way of exploring the effectiveness of the education and training methods implemented. The sample t-test will also be key in measuring the change in CAUTI infections. The implication is that data will be collected at baseline, which will give an insight into the rates of CAUTI before the implementation of the intervention. Data will also be collected regarding the rates of CAUTI upon the implementation of the CAUTI bundle as an intervention. Therefore, the sample t-test will be key in finding the impact of the intervention on the rates of CAUTI. Mean is another statistical measure that will be used in determining the mean of the staff knowledge regarding CAUTI and the use of CAUTI bundles to control CAUTI rates (Jolley, 2020).
References
Grove, S. K., & Cipher, D. J. (2019). Statistics for nursing research-e-book: a workbook for evidence-based practice. Elsevier Health Sciences.
Grove, S. K., & Gray, J. R. (2018). Understanding nursing research e-book: Building an evidence-based practice. Elsevier health sciences.
Jolley, J. (2020). Introducing Research and Evidence-Based Practice for Nursing and Healthcare Professionals. Routledge.